Solution to LED street light attenuation problem
2025-12-15
To address these existing issues, it is recommended that street lamp manufacturers start with basic materials and fundamentally solve the problem of high-power LED heat sources from the inside out. For example, in the bonding between light-emitting components and aluminum substrates, thermal conductive adhesive plays a key role. Some manufacturers think that the thermal conductivity of thermal conductive adhesive film or pad is better, and the thicker the film, the better, but they do not consider the issue of thermal resistance. No matter how good the thermal conductivity is, it's useless to touch the thermal resistance of the film thickness. Moreover, thermal conductive adhesive film or soft thermal conductive gasket cannot truly adhere to the substrate, and there are actually many pores on the bonding surface. These pores, when viewed under an electron microscope, resemble hollow air pockets, which are another form of thermal resistance. Under the presence of so many thermal resistances that interfere with heat conduction, the efficiency of heat dissipation and conduction is invisibly reduced.

To use thermal conductive adhesive, it is recommended to use soft ceramic thermal conductive adhesive. The soft ceramic thermal conductive adhesive used in screen printing construction is different from traditional adhesive films. Soft ceramic thermal conductive adhesive is a soft semi liquid state. When the scraper of the screen printing machine is applied to the aluminum substrate, the thermal conductive particles will penetrate into the pores on the surface of the substrate and fill them up. This will form a completely flat and pore free surface, which will be fully adhered to the LED epitaxial substrate when bonded. In this way, the thermal resistance is reduced to the lowest level, and the heat can be quickly conducted out, naturally reducing the ambient temperature of LED chips, extending the lifespan of epitaxial growth, and significantly delaying the occurrence of light decay. In addition, due to the ductility of the soft ceramic thermal conductive paint used in screen printing construction, it will change along with the thermal expansion and contraction of the aluminum substrate during high-temperature baking or reflow, with very low stress, and will not cause the aluminum substrate to bend or explode.

It is recommended to use LED lamp soft ceramic heat dissipation paint for external protection of LED lamps. This spray type soft ceramic heat dissipation paint can be directly sprayed on the outside of LED lamps, with simple construction operation, can adapt to various shapes of heat dissipation structures, and can also be adjusted to different colors to meet the needs of landscape design. The soft ceramic particles inside the spray type heat dissipation paint are nano treated, and the fine particles are not only easy to operate with a spray gun, but also make the same coating area more densely packed with thermal conductive particles, increasing the area for temperature evaporation and diffusion, allowing the heat energy of LED lamps to be quickly conducted out. Soft ceramic heat dissipation paint is a thermosetting material that complies with RoHS environmental and safety regulations. The construction process is simple and does not require any special equipment. After baking, it is heat cured and can withstand the high temperature of LED for a long time without any quality change problems. Outdoor LED street lights, landscape lights, or LED advertising billboards also face wind and rain, acid rain, bird droppings, air dust, and black smoke emissions; Wait for the acid-base invasion. So this spray type soft ceramic heat dissipation paint must have the characteristics of acid and alkali resistance. Currently, the range of acid and alkali resistance is between PH3-11, which can effectively protect the appearance of LED outdoor lamps from corrosion.

The cost structure of LED lighting fixtures has been continuously improved with the advancement of packaging technology, carrier board design, and heat dissipation module structure, and the quality has been continuously improved. The cost has also decreased with the development of technology and market demand. However, there are not many manufacturers investing in material improvement, which is mainly related to the development process and habits of Taiwan's industry and commerce. Taiwanese manufacturers excel in process and design, with less emphasis on material based research and development. So when it comes to solving technical problems or reducing costs, they tend to lean towards procurement thinking or production management thinking. However, American and Japanese manufacturers will think from the perspective of application materials, innovate to reduce costs, improve quality, and increase profits in the first place.

Previous:No more content
Next:No more content

Navigation

Send Us A Message

Submit